GD-80 Crosslinking Agent
Polyurethane Additive
—
Features
—
GD-80 is a polyurethane additive specifically designed for the manufacture of polyurethane foams, which is applied in polyurethane, textile and other industries. It doesn’t contain toxic substances and meets the requirements of health and environmental protection.
1. Improve the formulation tolerance, and solve the collapse and cracking of sponge.
2. The recommended usage amount is 0.5%-1%, according to the density of polyurethane foam to adjust the amount. The hardness of the sponge will decrease.
3. Applicable for ordinary , high rebound, slow rebound foam sponge.
Catalysts · Polyurethane Additive · Made In China
Product Parameters
—
| Model | Appearance | Flash point | Density @ 25℃ | Viscosity @ 25℃ |
| GD-80 | Transparent, viscous liquid | > 170℃ | 1.16g / cm3 | 750～1150 |
■ FYI: Above only represents typical results, and is not considered as specification. Actual property should be based on specific COA (Certificate of analysis).
Catalysts · Polyurethane Additive · Made In China
Type Of Production
—
| Model | | D-320 Aldehyde Remover | GD-80 Crosslinking Agent | C-320 Chain Extender | Hydrophilic Agent |
| Appearance | | Colorless viscous liquid |
| Flash Point | ℃ | >120 | >170 | >120 | >300 |
| Density @ 25℃ | /cm3 | 0.95g | 1.16g | 0.95g | 0.963g |
| Viscosity @ 25℃ | | 750-1150 | 700-1150 | 200-300 | 800-1300 |
Catalysts · Polyurethane Additive · Made In China
Package, Handle & Storage
—
Store in new steal drums, 200KGS/drums.
Keep container tighly closed in a dry and wel-ventilated place. Containers which are opened must be carefuly resealed and kept upright to prevent leakage.Store in cool place.
The shelf life is 12 months. After that, the pre-test should be made before use.
When handling polyols, precautions should be taken to avoid exposure to the eye or prolong contact with the skin. If eye contact occurs, flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.
Catalysts · Polyurethane Additive · Made In China
Catalysts · Polyurethane Additive · Made In China
About Us
—
Jiangsu Lihong Technology Development Co., Ltd. is a national high-tech enterprise integrating R&D, production, sales and technical services. The company is located in the Salt Chemical New Materials Industrial Park in Huai'an City, Jiangsu Province, covering an area of 150 acres. The total investment of the factory exceeds RMB 500 million. Currently, there are 14 production lines that lead the industry with independent innovation, with an annual production capacity of more than 100,000 tons.
The company is the key laboratory of green polyurethane materials in Huai'an City, a national high-tech enterprise, a specialized and innovative small and medium-sized enterprise in Jiangsu Province, a private technology-based enterprise in Jiangsu Province, and a member unit of the China Polyurethane Industry Association.
Certificates ( Click to enter )
Factory ( Click to enter )
Catalysts · Polyurethane Additive · Made In China
Product Tags:
|
|
GD-80 Crosslinking Agent Catalysts Polyurethane Foaming Additive For Soft Foam Images
|
